74
YASKAWA ELECTRIC
SIEP C710606 44B YASKAWA AC Drive T1000V Technical Manual
4.2 Using the Digital LED Operator
4.2 Using the Digital LED Operator
Use the LED operator to enter run and stop commands, display data, edit parameters, as well as display fault and alarm
information.
◆
Keys, Displays, and LEDs
Table 4.1 Keys and Displays on the LED Operator
No.
Display
Name
Function
1
Data Display Area
Displays the frequency reference, parameter number, etc.
2
ESC Key
Returns to the previous menu.
3
RESET Key
Moves the cursor to the right.
Resets the drive to clear a fault situation.
4
RUN Key
Starts the drive.
5
Up Arrow Key
Scrolls up to select parameter numbers, setting values, etc.
6
Down Arrow Key
Scrolls down to select parameter numbers, setting values, etc.
7
STOP Key
Stops the drive.
Note:
Stop priority circuit. A fast-stop is available by pressing the STOP key when
the drive detects a danger even if the drive is running by a signal from the multi-
function contact input terminal (REMOTE is set). To avoid stoppage by using the
STOP key, set o2-02 (STOP Key Function Selection) to 0 (Disabled).
8
ENTER Key
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the next.
STOP
(Hz)
(Hz)
(A)
(V)
Freq Reference
FWD / REV Sel
Output Freq
Output Current
Selected Monitor
Monitor
Verify
SetUpGuide
Parameter Set
Auto-Tuning
T1000V
:
:
:
:
:
:
:
:
:
:
Risque de décharge
électrique.
Lire le manuel avant l'installation.
Attendre 5 minutes après la coupure de l'alimentation,
pour permettre la décharge des condensateurs.
Pour répondre aux exigences , s assurer que le
neutre soit relié à la terre, pour la série 400V.
Read manual before installing.
Wait 5 minutes for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure
to ground the supply neutral for 400V class.
Risk of electric shock.
WARNING
AVERTISSEMENT
STOP
9
2
3
4
6
7
8
10
11
12
15
14
1
5
13
STOP