YASKAWA
TOEP C730600 89B PROFINET Installation Manual
9
2
Overview
This option provides a communications connection between the drive and a PROFINET
network. The option connects the drive to a PROFINET network and facilitates the
exchange of data.
PROFINET is a communications link to connect industrial devices (such as smart motor
controllers, operator interfaces, and variable frequency drives) as well as control devices
(such as programmable controllers and computers) to a network. PROFINET is a simple
networking solution. PROFINET reduces the cost and time to wire and install factory
automation devices, while providing interchangeability of like components from multiple
vendors.
PROFINET is an open network standard.
Install the option/PROFINET option on a drive to perform the following functions from a
PROFINET master device:
•
Operate the drive
•
Monitor the drive operation status
•
Change drive parameter settings
SI-EP3 is PROFINET Conformance Class A certified.
◆
Compatible Products
You can use the option with these products:
Table 2.1 Compatible Products
Drive
Model
Software Version
A1000
CIMR-Ax2Axxxx
≥ 1018
CIMR-Ax4Axxxx
CIMR-Ax5Axxxx
≥ 5040
≥ 1010
U1000
CIMR-UxxAxxxx
≥ 1010
CIMR-UxxExxxx
CIMR-UxxPxxxx
CIMR-UxxWxxxx
U1000L
CIMR-UxxLxxxx
≥ 6210
CIMR-UxxFxxxx
CIMR-UxxRxxxx
