40
YASKAWA
TOEP C730600 89B PROFINET Installation Manual
A - PLC
B - PROFINET switch
C - Drive
Figure 5.23 Prepare and Connect Communication Cable Wiring
◆
GSD Files
To facilitate network implementation, obtain a GSD file from one of the following
websites depending on your region: U.S.: http://www.yaskawa.com Europe: http://www.
yaskawa.eu.com Japan: http://www.e-mechatronics.com Other areas: Check the back
cover of these manuals. For questions, contact Yaskawa or a Yaskawa representative.
Note:
Download the GSD file for YASKAWA AC Drive Option SI-EP3. If you download an incorrect GSD file, this
product will not operate as a slave in the network.
6
Related Drive Parameters
These parameters set the drive for operation with the option. Confirm correct parameter
settings in this table before you start network communications.
Note:
Hex.: MEMOBUS addresses that you can use to change parameters over network communication are
represented in hexadecimal numbers.
