YASKAWA
TOEP YAICOM 22A BACnet MS/TP Installation & Technical Manual
19
A - Route wires through the openings
provided on the left side of the
front cover.
B - Use the open space provided
inside the drive to route option
wiring.
Figure 5.6 Wire Routing Examples
*1
If there is wiring outside the enclosure, the drive will not meet Enclosed wall-mounted
type (IP20/UL Type 1) requirements.
6.
Firmly connect the BACnet communication cable to terminal block (TB1).
Isolate communication cables from main circuit wiring and other electrical and
power lines. Make sure that you firmly connect the cable end. Refer to
Communication Cable Topology on page 30
for more information.
7.
Reattach the front cover (A), terminal cover (C), and keypad (B).
Refer to the drive manuals for more information.
NOTICE
Do not pinch cables between the front covers and the drive. Failure to
comply could cause erroneous operation.