n
The information described in product catalogs or manuals is provided for the purpose
of the customer purchasing the appropriate product for the intended application. The
use thereof does not guarantee that there are no infringements of intellectual property
rights or other proprietary rights of Yaskawa or third parties, nor does it construe a
license.
n
Yaskawa shall not be responsible for any damage arising from infringements of intel-
lectual property rights or other proprietary rights of third parties as a result of using
the information described in catalogs or manuals.
1.8.3 Suitability for Use
n
It is the customer’s responsibility to confirm conformity with any standards, codes, or
regulations that apply if the Yaskawa product is used in combination with any other
products.
n
The customer must confirm that the Yaskawa product is suitable for the systems,
machines, and equipment used by the customer.
n
Consult with Yaskawa to determine whether use in the following applications is
acceptable. If use in the application is acceptable, use the product with extra allow-
ance in ratings and specifications, and provide safety measures to minimize hazards
in the event of failure.
–
Outdoor use, use involving potential chemical contamination or electrical interfer-
ence, or use in conditions or environments not described in product catalogs or
manuals
–
Nuclear energy control systems, combustion systems, railroad systems, aviation
systems, vehicle systems, medical equipment, amusement machines, and instal-
lations subject to separate industry or government regulations
–
Systems, machines, and equipment that may present a risk to life or property
–
Systems that require a high degree of reliability, such as systems that supply gas,
water, or electricity, or systems that operate continuously 24 hours a day
–
Other systems that require a similar high degree of safety
n
Never use the product for an application involving serious risk to life or property
without first ensuring that the system is designed to secure the required level of safety
with risk warnings and redundancy, and that the Yaskawa product is properly rated
and installed.
n
The circuit examples and other application examples described in product catalogs
and manuals are for reference. Check the functionality and safety of the actual
devices and equipment to be used before using the product.
n
Read and understand all use prohibitions and precautions, and operate the Yaskawa
product correctly to prevent accidental harm to third parties.
1.8.4 Specifications Change
The names, specifications, appearance, and accessories of products in product catalogs
and manuals may be changed at any time based on improvements and other reasons.
The next editions of the revised catalogs or manuals will be published with updated code
numbers. Consult with your Yaskawa representative to confirm the actual specifications
before purchasing a product.
1.9 Use of This Manual
This manual contains information on the intended use of the Feedback Option Module for
Sigma-5 Series and Sigma-7 Series SERVOPACKs.
Sigma-5 and Sigma-7 Series SERVOPACKs
General
Use of This Manual
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en |
20
