10.3 Monitoring Machine Operation Status and Signal Waveforms
10.3.3 Using a Measuring Instrument
10-12
•
Gain Adjustment
Operating Procedure
Use the following procedure to adjust the analog monitor output.
1.
Click the
Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select
Adjust the Analog Monitor Output
in the Menu Dialog Box.
The Adjust the Analog Monitor Output Dialog Box will be displayed.
3.
Click the
Zero Adjustment
or
Gain Adjustment
Tab.
4.
While watching the analog monitor, use the
+1
and
-1
Buttons to adjust the offset.
There are two channels: CH1 and CH2. If necessary, click the down arrow on the
Channel
Box and
select the channel.
This concludes adjusting the analog monitor output.
Tool
Function
Operating Procedure Reference
Digital Operator
Fn00D
Σ
-7-Series Digital Operator Operating Manual
(Manual No.: SIEP S800001 33)
S
Setup - Adjust Offset
