5.1 Manipulating SERVOPACK Parameters (Pn
)
5.1.4 Write Prohibition Setting for SERVOPACK Parameters
5-7
5
Basic Functions That Requir
e Setting befor
e Operation
5.1.4
Write Prohibition Setting for SERVOPACK Parameters
You can prohibit writing SERVOPACK parameters from a Digital Operator. Even if you do, you
will still be able to change SERVOPACK parameter settings from the S or with Ether-
CAT (CoE) communications.
Preparations
No preparations are required.
Applicable Tools
The following table lists the tools that you can use to change the write prohibition setting for
SERVOPACK parameters and the applicable tool functions.
Operating Procedure
Use the following procedure to prohibit or permit writing parameters.
1.
Click the
Servo Drive Button in the workspace of the Main Window of the S.
2.
Select
Write Prohibition Setting
in the Menu Dialog Box.
The Write Prohibition Setting Dialog Box will be displayed.
3.
Press the
or
for the rightmost digit and set one of the following.
0000: Writing is permitted (default setting).
0001: Writing is prohibited.
4.
Click the
Setting
Button.
Tool
Function
Reference
Digital Operator
Fn010
Σ
-7-Series Digital Operator Operating
Manual (Manual No.: SIEP S800001
33)
S
Setup - Write Prohibited Setting
