n
o1-05: LCD Contrast Control
Sets the brightness of the digital operator. The lower the setting, the brighter the LCD contrast. The higher the setting, the
darker the LCD contrast.
Note:
Available in drive software versions PRG: 8503 and later.
No.
Name
Setting Range
Default
o1-05
LCD Contrast Control
0 to 5
3
n
o1-06: User Monitor Selection Mode
Select between standard sequential monitors or selectable monitors to be displayed on the 2nd and 3rd lines of the digital
operator display.
Use parameters o1-07 and o1-08 to select and fix the second and third monitors shown in the Home (Frequency Reference)
and Monitor screen to ensure that those monitors are always visible when scrolling through the monitor list.
No.
Name
Setting Range
Default
o1-06
User Monitor Selection Mode
0, 1
0
Setting 0: 3 Mon Sequential (displays the next 2 sequential monitors)
Setting 1: 3 Mon Selectable (set by o1-07 and o1-08)
n
o1-07: Second Line User Monitor Selection
Selects the monitor that is shown in the second line. Effective only when o1-06 is set to 1.
Enter the last three digits of the monitor parameter number to be displayed: U
o
-
oo
. For example, set “403” to display
monitor parameter U4-03.
No.
Name
Setting Range
Default
o1-07
Second Line User Monitor Selection
101 to 799
102
n
o1-08: Third Line User Monitor Selection
Selects the monitor that is shown in the third line. Effective only when o1-06 is set to 1.
Enter the last three digits of the monitor parameter number to be displayed: U
o
-
oo
. For example, set “403” to display
monitor parameter U4-03.
No.
Name
Setting Range
Default
o1-08
Second Line User Monitor Selection
101 to 799
103
n
o1-09: Frequency Reference Display Units
Selects the monitor that is shown in the third line. Enter the last three digits of the monitor parameter number to be displayed:
U
o
-
oo
. For example, set "403" to display monitor parameter U4-03.
Note:
Parameter is effective only when o1-06 is set to 1.
No.
Name
Setting Range
Default
o1-09
Frequency Reference Display Units
0 to 15; 24, 25
25
5.10 o: Operator Related Settings
268
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual