5 Notes for Safe Operation
E-3
5 Notes for Safe Operation
Read this manual thoroughly before checking products on delivery, storage and transportation,
installation, wiring, maintenance and inspection, and disposal of the MP2200/MP23
/
MP2400 Machine Controller.
• Before starting operation with a machine connected, make sure that an emergency stop can
be applied at any time.
Failure to observe this warning may result in injury.
• Never touch the inside of the unit.
Failure to observe this warning may result in electric shock.
• Do not remove the front cover while the power is ON.
Failure to observe this warning may result in electric shock.
• Follow the procedures and instructions for trial operation precisely as noted in the Machine
Controller MP2200 User’s Manual (Manual No.: SIEP C880700 14), the Machine Controller
MP2300 Basic Module User’s Manual (Manual No.: SIEP C880700 03), the Machine Con-
troller MP2300S Basic Module User’s Manual (Manual No.: SIEP C880732 00), the Machine
Controller MP2310 Basic Module User’s Manual (Manual No.: SIEP C880732 01), and the
Machine Controller MP2400 User’s Manual (Manual No.: SIEP C880742 00).
Malfunctions that occur after the servomotor is connected to the equipment not only damage the
equipment, but may also cause an accident resulting in death or injury.
• Do not damage, press, exert excessive force or place heavy objects on the cables.
Failure to observe this warning may result in electric shock, stopping operation of the product, or
burning.
• Do not modify the product.
Failure to observe this warning may result in injury or damage to the product.
• Do not come close to the machine immediately after resetting momentary power loss to
avoid an unexpected restart. Take appropriate measures to ensure safety against an unex-
pected restart.
Failure to observe this warning may result in injury.
• Installation, disassembly, or repair must be performed only by authorized personnel.
Failure to observe this warning may result in electric shock or injury.
WARNING