2-5
169861-1CD
HW1482771
2
Setup
2.5 System Configuration
Weldcom Function: Arc
Welding Digital I/F
2.5
System Configuration
The following figure illustrates the configuration procedure outline. The
following and later pages explain the detailed procedure of each setting.
Note that the initialization processing after system upgrade is omitted.
[Initialization] entry
[2.5.3] Setting of Optional Function
"WELDCOM Function"
Start
Did you upgrade
system software?
End
[2.5.1] I/O Module Setting Check
after Changing EW Board
Station Number Setting
[SETUP] entry
[SETUP] entry
Language, model, I/O module, ...
Initialization processing of each items
:
N O
[2.5.4] Detailed Setting of
Welding Power Source
[2.5.6] Setting of Optional
Function "MotoPlus Function"
* When the welder is FroniusTPSi;
[2.5.7] Loading of Dedicated
MotoPlus Application
[2.5.8] Setting of Parameter
[2.5.5] I/O Module Setting Check
after Adding Virtual EW Module
[2.5.2] Setting of Optional Function
"Network Function"
For Fronius welding power source,
change the "ARC WELDING" setting
from "STANDARD" to "ENHANCED"
Y E S
21 of 75
