YASKAWA LA500, Technical Manual

Page: 304 / 376

12.6 H: Terminal Function Selection
304 YASKAWA SIEPYEULA5001C LA500 Technical Manual
12.6 H: Terminal Function Selection
H parameters set functions for external input and output terminals.
◆
H1: Digital Inputs
H1 Parameters set the MFDI terminal functions.
■
H1-03 to H1-07 Terminal S3 to S7 Function Selection
The drive has 7 MFDI terminals. Refer to Table 12.4 for drive default settings and functions.
Table 12.4 MFDI Default Settings and Functions
No. Name Default Function
H1-03 Term S3 Function Selection 50 Nominal Speed
H1-04 Term S4 Function Selection 54 Inspection Operation
H1-05 Term S5 Function Selection 51 Intermediate Speed
H1-06 Term S6 Function Selection 53 Leveling Speed
H1-07 Term S7 Function Selection F Not Used (Through Mode)
Refer to the Table 12.5 and use H1-xx [MFDI Function Select] to set the function.
Table 12.5 MFDI Setting Values
Setting Value Function Reference
3 Multi-Step Speed Reference 1
305
4 Multi-Step Speed Reference 2 305
5 Multi-Step Speed Reference 3
305
7 Accel/Decel Time Selection 1
305
8 Baseblock Command (N.O.)
305
9 Baseblock Command (N.C.) 306
F Through Mode
306
14 Fault Reset
306
15 Fast Stop (N.O.)
306
17 Fast Stop (N.C.) 307
18 Timer Function
307
1A Accel/Decel Time Selection 2
307
Setting Value Function Reference
20 to 2F External fault
307
40 Forward RUN (2-Wire) 308
41 Reverse RUN (2-Wire)
309
50 Nominal Speed
309
51 Intermediate Speed
309
52 Releveling Speed 309
53 Leveling Speed
309
54 Inspection Operation
309
55 Rescue Operation
309
56 Motor Connector Feedback 310
79 Brake Feedback
310
103 - 179 Inverse Inputs of 1 to 79
-
■
H1-03: Terminal S3 Function Selection
No.
(Hex.)
Name Description
Default
(Range)
H1-03
(0400)
Terminal S3 Function
Selection
Sets the function for MFDI terminal S3.
50
(3 - 79)
■
H1-04: Terminal S4 Function Selection
No.
(Hex.)
Name Description
Default
(Range)
H1-04
(0401)
Terminal S4 Function
Selection
Sets the function for MFDI terminal S4.
54
(3 - 79)
■
H1-05: Terminal S5 Function Selection
No.
(Hex.)
Name Description
Default
(Range)
H1-05
(0402)
Terminal S5 Function
Selection
Sets the function for MFDI terminal S5.
51
(3 - 79)
V/f OLV
V/f OLV
V/f OLV