YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
535
Note:
Push
(Hold) to switch between Pause and Restart for the monitor display. The
“
Hold (ENTER)
”
message flashes while you pause
monitoring.
◆
Change Parameter Settings
This example shows how to change the setting value for
C1-01 [Acceleration Time 1]
. Do the steps in this procedure
to set parameters for the application.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown above the
, push
(Back).
2.
Push
(Menu).
3.
Push
or
to select [Parameters], then push
.
4.
Push
or
to select [C Tuning], then push
.
5.
Push
or
to select [C1 Accel & Decel Time], then push
.
