YASKAWA
TOEPYAIHV6002A HV600 Drive Programming
517
3.4
Start-up Procedures
This section gives the basic steps necessary to start up the drive.
Use the flowcharts in this section to find the most applicable start-up method for your application.
This section gives information about only the most basic settings.
Note:
Refer to the
A1-06
section to use an Application Preset to set up the drive.
◆
Flowchart A: Connect and Run the Motor with Minimum Setting Changes
Flowchart A shows a basic start-up sequence to connect and run a motor with a minimum of setting changes. Settings
can change when the application changes.
Use the drive default parameter settings for basic applications where high precision is not necessary.
Figure 3.8 Basic Steps before Startup
