YASKAWA HV600, Manual

Page: 420 / 610

2.11 o: Keypad-Related Settings
420 YASKAWA TOEPYAIHV6002A HV600 Drive Programming
■
o3-04: Select Backup/Restore Location
No.
(Hex.)
Name Description
Default
(Range)
o3-04
(0B3E)
Select Backup/Restore
Location
Sets the storage location for drive parameters when you back up and restore parameters. This
parameter is only available on an HOA keypad.
0
(0 - 3)
You can use the HOA keypad to make a maximum of 4 parameter backup sets.
0 : Memory Location 1
1 : Memory Location 2
2 : Memory Location 3
3 : Memory Location 4
■
o3-05: Select Items to Backup/Restore
No.
(Hex.)
Name Description
Default
(Range)
o3-05
(0BDA)
Select Items to Backup/
Restore
Sets which parameters the drive backs up, restores, and references. This parameter is only available
on an HOA keypad.
1
(0, 1)
0 : Standard Parameters
1 : St DWEZ Parameters
Note:
• Parameters qx-xx [DriveWorksEZ Parameters] and rx-xx [DriveWorksEZ Connections] show when A1-07 = 1 or 2 [DriveWorksEZ
Function Selection = DWEZ Enabled or Enabled/Disabled wDigital Input] .
• The password for DriveWorksEZ PC software is necessary to back up qx-xx and rx-xx . If you enter an incorrect password, the drive detects
PWEr [DWEZ Password Mismatch] .
■
o3-06: Auto Parameter Backup Selection
No.
(Hex.)
Name Description
Default
(Range)
o3-06
(0BDE)
Auto Parameter Backup
Selection
Sets the function that automatically backs up parameters. This parameter is only available on an
HOA keypad.
1
(0, 1)
When you connect the drive and keypad, the drive will automatically back up drive parameters to the keypad as
specified by
o3-06 and o3-07 .
0 : Disabled
1 : Enabled
Note:
When you replace the HOA keypad then energize the drive, the keypad automatically shows the restore operation screen to restore the drive
configuration with the parameters backed up to the HOA keypad. If you connect an HOA keypad that does not have parameter backup data,
the keypad will not show the restore operation screen.
■
o3-07: Auto Parameter Backup Interval
No.
(Hex.)
Name Description
Default
(Range)
o3-07
(0BDF)
Auto Parameter Backup
Interval
Sets the interval at which the automatic parameter backup function saves parameters from the drive
to the keypad.
1
(0 - 3)
The drive saves parameter settings to the keypad at these times:
1. After you energize the drive and the auto backup period passes.
2. When you use ROM enter or the keypad to change parameters, the drive saves those changes in the drive, waits
for the auto backup period to pass, then saves those parameters in the keypad.
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV
V/f OLV/PM OLV/PM EZOLV