YASKAWA HV600, Manual

Page: 405 / 610

Parameter
Details
2
2.11 o: Keypad-Related Settings
YASKAWA TOEPYAIHV6002A HV600 Drive Programming 405
Table 2.62 Example of Message Displays for Pre-Charge
Default (o1-82 = 0) Full Screen Message (o1-82 = 1)
Note:
• When o1-80 = 0 [OFF] , drive Faults, oFAxx , or CPFs do not trigger a full-screen message to display.
•
When o1-81= 0 [Alarm Screen Display = OFF] , drive Alarms do not trigger a full-screen message to display.
•
When o1-82 = 0 [Message Screen Display = OFF] , drive Messages do not trigger a full-screen message to display. The keypad will
continue to show limit errors and other informative screens.
• You cannot select the display method of oPExx [Parameter Setting Errors] . The keypad shows oPExx errors as full screen displays and
status monitor displays. Active oPExx errors have display priority over active faults and alarms.
Status Monitor Display
When o1-40 = 0 [Home Screen Display Selection = Custom Monitor] , the keypad will show the Status Monitor on
the second and third lines of the HOME screen.
•
The second line shows HOA status and other information, for example:
– Fault/Alarm/ oPExx / oFAxx codes
–
MEMOBUS Multiplex drive status
– Information Text status
•
The third line shows information texts, for example:
– Pre-Charge messages
–
Sleep messages
– MEMOBUS Multiplex Staging and De-staging messages
It will also show Information Text for Sequence Timer status.
Table 2.63 shows the examples of Status Monitor display during normal operation.