YASKAWA H6R B Series, Performance Test Manual, Page: 11 / 14

4 Primary Operation Tests
YASKAWA TOEPYAIH6R01B HV600 REDUNDANT DRIVE OPERATIONAL TEST MANUAL 11
◆
Primary Operation Test (Drive B)
Table 4.2 Primary Operation Test (Drive B)
Check Step Details Figure
□ 7 Set the HAND-OFF-AUTO switch to “ OFF ” .
□ 8 Set the MAN-FAULT XFER-AUTO switch to
“
MAN
”
for manual.
□ 9 Set the DRV A-AUTO-DRV B switch to
“
DRV B
”
.
□ 10
SET THE HAND-OFF-AUTO switch to “ HAND ” to start the drive and control drive operation. Use the
keypad to adjust manual speed reference.
Do the normal startup procedure (check rotation direction, check damper position if necessary, set min/
max speeds and accel/decel times, etc.).
□ 11 When commissioning is complete, set the HAND-OFF-AUTO switch to “ OFF ” to stop the drive.
◆
Expanded Function Test
Table 4.3 Expanded Function Test
Check Step Details Figure
□ 12
Check AUTO control for correct operation.
Set the HAND-OFF-AUTO switch to “ AUTO ” .
□ 13
When you will use the Building Automation System (BAS) to select Drive A or Drive B, set the DRV
A-AUTO-DRV B switch to
“ AUTO ” .
When you will NOT use the BAS to select Drive A or Drive B, set the DRV A-AUTO-DRV B switch to
“ DRV A ” or “ DRV B ” to manually select each drive..
□ 14 Confirm that you can use the BAS to start and stop Drive A and Drive B in AUTO. -
□ 15 Confirm that you can use the BAS to change the speed reference for Drive A and Drive B. -