YASKAWA GA80U Series, Installation & Primary Operation, Page: 95 / 168

12 UL Standards
YASKAWA TOEPC71061737D GA800 DRIVE INSTALLATION & PRIMARY OPERATION 95
Model
Recomm. Gauge (AWG, kcmil)
Crimp Terminal
Model
R/L1
S/L2
T/L3
U/T1
V/T2
W/T3
-, +1 +3
4H11
250 × 4P × 2 250 × 4P × 2 - - - LCA250-12-X
- - 300 × 4P × 2 - - LCA300-12-X
- - - 2/0 × 4P × 2 - LCA2/0-12-X
- - - - 4/0 LCA4/0-12-X
4H12
300 × 4P × 2 300 × 4P × 2 - - - LCA300-12-X
- - 300 × 4P × 2 - - LCA300-12-X
- - - 3/0 × 4P × 2 - LCA3/0-12-X
- - - - 4/0 LCA4/0-12-X
Table 12.3 Closed-Loop Crimp Terminals for 6-Phase/12-Pulse 400 V Class Drives (Drive Models: 4xxx) (Manufacturer:
PANDUIT Corp.)
Model
Recomm. Gauge (AWG, kcmil) *1
Crimp Terminal
Model
*3
R/L1, R1/L11
S/L2, S1/L21
T/L3, T1/L31
*2
U/T1
V/T2
W/T3
-, +1 +3
4810
2/0 × 4P (× 2) - - - - LCA2/0-12-X
- 3/0 × 4P × 2 - - - LCA3/0-12-X
- - 4/0 × 4P × 2 - - LCA4/0-12-X
- - - 1/0 × 4P × 2 - LCA1/0-12-X
- - - - 3/0 LCA3/0-12-X
4930
3/0 × 4P (× 2) - - - - LCA3/0-12-X
- 4/0 × 4P × 2 4/0 × 4P × 2 - - LCA4/0-12-X
- - - 1/0 × 4P × 2 - LCA1/0-12-X
- - - - 3/0 LCA3/0-12-X
4H11
4/0 × 4P (× 2) - - - - LCA4/0-12-X
- 250 × 4P × 2 - - - LCA250-12-X
- - 300 × 4P × 2 - - LCA300-12-X
- - - 2/0 × 4P × 2 - LCA2/0-12-X
- - - - 4/0 LCA4/0-12-X
4H12
4/0 × 4P (× 2) - - - - LCA4/0-12-X
- 300 × 4P × 2 300 × 4P × 2 - - LCA300-12-X
- - - 3/0 × 4P × 2 - LCA3/0-12-X
- - - - 4/0 LCA4/0-12-X
*1 The wire gauges for drive models 4810 to 4H12 are the recommended wire gauges when you use these drive models as a 6-Phase/12-
Pulse drive.
*2 When you use drive models 4810 to 4H12 as a 6-Phase/12-Pulse drive, remove the common bus bars on the input terminals.
*3 For use with PANDUIT Corp. heat-shrinkable tubing HSTT-series or an equivalent UL-recognized heat-shrinkable tubing rated 600 V
minimum.