YASKAWA
TOEPC71061737D GA800 DRIVE INSTALLATION & PRIMARY OPERATION
9
NOTICE
Make sure that all connections are correct after you install the drive and connect peripheral devices. Incorrect
connections can cause damage to the drive.
NOTICE
Do not connect phase-advancing capacitors, LC/RC noise filters, or leakage breakers (GFCI) to the motor circuit.
If you connect these devices to the output circuits, it can cause damage to the drive and connected equipment.
NOTICE
Use an inverter-duty motor or vector-duty motor with reinforced insulation and windings applicable for use with an
AC drive. If the motor does not have the correct insulation, it can cause a short circuit or ground fault from insulation deterioration.
Note:
Do not use unshielded wire for control wiring. Use shielded, twisted-pair wires and ground the shield to the ground terminal of the drive.
Unshielded wire can cause electrical interference and unsatisfactory system performance.
◆
Exclusion of Liability
•
This product is not designed and manufactured for use in life-support machines or systems.
•
Contact a Yaskawa representative or your Yaskawa sales representative if you are considering the application of this
product for special purposes, such as machines or systems used for passenger cars, medicine, airplanes and
aerospace, nuclear power, electric power, or undersea relaying.
WARNING
Injury to Personnel. When you use this product in applications where its failure could cause the loss of human life,
a serious accident, or physical injury, you must install applicable safety devices. If you do not correctly install safety devices, it can
cause serious injury or death.
3
Cybersecurity
This product is designed to connect and communicate information and data through a network interface. It is the sole
responsibility of the customer to provide and continuously guarantee a secure connection between the product and the
customer's network or if applicable, any other network. The customer must establish and maintain the appropriate
measures (such as, but not limited to, the installation of firewalls, the application of authentication measures, the
encryption of data, the installation of antivirus programs, etc.) to protect the product, the network, its system and the
interface against all types of security breaches, unauthorized access, interference, intrusion, leakage and/or theft of
data or information. Yaskawa and its affiliates are not responsible for damages and/or losses related to such security
breaches, any unauthorized access, interference, intrusion, leakage and/or theft of data or information.
4
Receiving
The product packaging contains the product and instruction manual.
1. Examine the drive for damage or missing parts. Immediately contact the shipping company if the drive is
damaged. The Yaskawa warranty does not cover damage from shipping.
2. Examine the catalog code to make sure that you received the correct model. Examine the catalog code in the
“
C/
C
”
section of the drive nameplate to make sure that you received the correct model.
3. Contact your supplier or Yaskawa sales office if you received an incorrect drive model or if the drive does not
operate correctly.
4. When you operate more than one drive, check all drives and motors separately.
5. Do not use damaged parts to connect the product and the motor.