YASKAWA GA800 Series, Maintenance & Troubleshooting

Page: 487 / 566

Startup
Procedure
and
T
est
Run
6
6.7 Automatic Parameter Settings Optimized for Specific Applications (Application Presets)
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 487
6.7 Automatic Parameter Settings Optimized for Specific
Applications (Application Presets)
The drive has application presets to set the necessary parameters for different applications to their best values. Use
A1-06 from [User Custom Parameters] on the Main menu to check the parameters that were automatically changed by
the application preset function.
Note:
Make sure that you set A1-03 = 2220, 3330 [Initialize Parameters = 2-Wire Initialization, 3-Wire Initialization] to initialize parameters
before you set A1-06 .
This section shows the procedure to set an application preset.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Parameters], then push .
4.
Push or to select [A Initialization Parameters], then push .
5.
Push or to select [A1 Initialization], then push .