YASKAWA GA800 Series, Maintenance & Troubleshooting

Page: 477 / 566

Startup
Procedure
and
T
est
Run
6
6.6 Keypad Operation
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 477
9.
Push or to select the hour or minute, then push or to change the value.
10.
When you are done setting the time, push .
The procedure for setting the date and time is complete.
◆
Set Parameters Using the Setup Wizard
The Setup Wizard lets users follow simple messages on the keypad to set these basic parameters:
•
Frequency Reference Source
•
Input signal level
•
Run command source
•
Duty Rating
•
Motor type
•
Control Method Selection
•
Maximum frequency
•
Input/output settings
Note:
The Setup Wizard function will initialize all parameters before it sets the basic parameters.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push [Back] to show [Home] on .
2.
Push [Menu].
3.
Push or to select [Initial Setup], then push .