YASKAWA GA800 Series, Maintenance & Troubleshooting, Page: 456 / 566

6.6 Keypad Operation
456 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
The configuration procedure is complete.
◆
Display Monitors as an Analog Gauge
The following explains how to display the contents selected for a monitor as an analog gauge.
1.
Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push [Back] to show [Home] on .
2.
Push [Menu].
3.
Push or to select [Monitors], then push .
4.
Push or to select [Analog Gauge], then push .
It will be displayed as follows.
◆
Set Monitoring Items to be Shown as a Trend Plot
You must set the items in this figure to display as a trend plot.