3.10 Crane Application Setup Procedure
YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
223
■
Related Monitors
No.
Name
Bit
U4-53
Num of Driv 1 (Low)
Displays the lower 4 digits of the cumulative motor 1 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-54
displays the upper 4 digits, and
U4-
53
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-09
.
U4-54
Num of Driv 1 (High)
Displays the upper 4 digits of the cumulative motor 1 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-54
displays the upper 4 digits, and
U4-
53
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-09
.
U4-55
Num of Driv 2 (Low)
Displays the lower 4 digits of the cumulative motor 2 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-56
displays the upper 4 digits, and
U4-
55
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-10
.
U4-56
Num of Driv 2 (High)
Displays the upper 4 digits of the cumulative motor 2 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-56
displays the upper 4 digits, and
U4-
55
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-10
.
U4-57
Num of Driv 3 (Low)
Displays the lower 4 digits of the cumulative motor 3 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-58
displays the upper 4 digits, and
U4-
57
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-11
.
U4-58
Num of Driv 3 (High)
Displays the upper 4 digits of the cumulative motor 3 startup count.
Note:
The drive run count appears as an 8-digit number.
U4-58
displays the upper 4 digits, and
U4-
57
displays the lower 4 digits.
The maximum count value is 10,000,000. The counter stops once the maximum value is reached.
The count value can be changed with
S2-11
.
◆
Frequency Reduction Gain
This function switches to low-speed operation when the crane load is near the target position.
The frequency is adjusted by multiplying the gain against the smallest frequency reference from among
d1-01
[Reference 1] through d1-17 [Jog Reference]
as selected by the multi-step speed reference. When the external
input terminal to which frequency reduction gain is assigned turns on, the gain set to
S2-16
or
S2-17
is applied to
the normal frequency reference followed by a corresponding switch to low-speed operation.
Note:
This function is disabled when the frequency reference is held through the use of
H1-xx = A [Accel/Decel Ramp Hold]
or
H1-xx = 10 or
11 [Up/Down Command]
.
■
Related Parameters
No.
Name
Description
Default
(Range)
S2-16
Micro Speed Gain1
Sets the gain used to decrease the frequency reference. This parameter is enabled when the
terminal set to
H1-xx = 3A [MFDI Function Select = Micro Speed Gain1]
turns on.
1.00
(0.00 - 1.00)
S2-17
Micro Speed Gain2
Sets the gain used to decrease the frequency reference. This parameter is enabled when the
terminal set to
H1-xx = 3B [MFDI Function Select = Micro Speed Gain2]
turns on.
1.00
(0.00 - 1.00)
Summary of Contents for CR700
