52
YASKAWA
TOEPC71061723A YASKAWA AC Drive CR700 Quick Start Guide
◆
Change Parameter Setting Values
This example shows how to change the setting value for
C1-01 [Acceleration Time 1]
. Do the steps in this
procedure to set parameters for the application.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown above the
, push
(Back).
2.
Push
(Menu).
3.
Push
or
to select [Parameters], then push
.
4.
Push
or
to select [C Tuning], then push
.
5.
Push
or
to select [C1 Accel & Decel Time], then push
.
6.
Push
or
to select
C1-01
, then push
.
7.
Push
or
to select the specified digit, then push
or
to select the correct number.