YASKAWA CC-Link SI-C3, Installation Manual

Page: 22 / 139

5 Installation Procedure
22 YASKAWA TOEP C730600 83A CC-Link Installation Manual
A - Route wires through the openings
provided on the left side of the
front cover.
*1
B - Use the open space provided
inside the drive to route option
wiring.
Figure 5.6 Wire Routing Examples
*1 If there is wiring outside the enclosure, the drive will not meet Enclosed wall-mounted
type (IP20/UL Type 1) requirements.
6.
Firmly connect the CC-Link communication cable to the option modular connector
(CN1).
Isolate communication cables from main circuit wiring and other electrical and
power lines. Make sure that you firmly connect the cable end. (Refer to
Option
Connection Diagram on page 30 ). Refer to Communication Cable Specifications
on page 31 for more information.
Note:
Do not connect or disconnect the communication cable while the drive is powered up or while the drive
is in operation. Failure to obey can cause a static discharge, which will cause the option to stop
working correctly. Cycle power on the drive and option to start using the option again.
7.
Reattach the front cover (A), terminal cover (C), and keypad (B).
Refer to the drive manuals for more information.
NOTICE
Do not pinch cables between the front covers and the drive. Failure to
comply could cause erroneous operation.