manualshive.com logo in svg

YASKAWA AI-A3, Installation Manual

Share
Download
YASKAWA AI-A3 Installation Manual Download Page 7

1  Preface and Safety

YASKAWA ELECTRIC

 TOBP C730600 78D YASKAWA AC Drive Option AI-A3 Installation Manual

 7

W ARNING 

Electrical Shock Hazard

Do not attempt to modify or alter the drive or drive circuitry in any way not 
explained in this manual. 

Failure to comply could cause death or serious injury and will void warranty. Yaskawa is 
not responsible for any modification of the product made by the user. Do not modify this 
product.

NOTICE

Do not modify the drive or option circuitry.

Failure to comply could result in damage to the drive or option and will void warranty.
Yaskawa is not responsible for any modification of the product made by the user.

Do not expose the drive or the option to halogen group disinfectants. Do not pack the 
drive or the option in fumigated or sterilized wooden materials. Do not sterilize the 
entire package after packing the product.

Failure to comply could damage electrical components in the option.

GEM_IO_conditional_E - コピー.fm  7 ページ  ２０２２年１月１９日　水曜日　午前９時５６分

Summary of Contents for AI-A3


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands