YASKAWA 67P-RTP0, Manual

Page: 15 / 73

2.3.3 Memory management
n 8GB work memory
n 64GB SSD iSLC user memory
n USB storage media using "Host"-USB-A interface
n Slot for CFast memory card
The Panel PC has a work memory with a size of 8GB. The work memory is not buffered
and is deleted after shut down.
As internal permanent storage medium the Panel PC has a 64GB flash module (40GB
user data).
The Panel PC has got three USB-A interfaces (1x USB 3.0 and 2x USB 2.0). The con-
nection of USB sticks and USB drives are supported by the Panel PC.
At the back of the Panel PC there is a card slot for a memory card. At this slot you can
plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not
hot-swap compatible.
Pin Assignment Pin Assignment
S1 GND PC6 n.c.
S2 S PC7 GND
S3 SATA_TX1- PC8 CFAST_LED1_C
S4 GND PC9 CFAST_LED2_C
S5 S PC10 n.c.
S6 SATA_RX1- PC11 n.c.
S7 GND PC12 n.c.
PC1 CFAST_CDI PC13 VCC3
PC2 GND PC14 VCC3
PC3 n.c. PC15 GND
PC4 n.c. PC16 GND
PC5 n.c. PC17 CFAST_CDO
Prior to removing the CFast card, make sure the unit's power is off and
disconnected from the power supply.
Overview
Work memory
User memory
USB storage media
Slot for CFast
HMI
Hardware description
Structure > Memory management
HB160 | PPC | 67P-RTP0 | en | 22-22 15