manualshive.com logo in svg

YASKAWA 62P-PNJ0, Manual, Page: 39 / 58

Share
Download
YASKAWA 62P-PNJ0 Manual Download Page 39

This section is used to configure the CPU.

This field is used to enable or disable hyper-threading.

XD can prevent certain classes of malicious buffer overflow attacks.

Enabled - Permit the switching on of the execute disable function by the OS.

Disabled - Prevents the switching on of the execute disable function by the OS; it will

force the XD feature flag to always return to 0.

The CPUID instruction of some newer CPUs will return a value greater than 3. The

default is disabled because this problem does not exist in the Windows series operating

systems. If you are using an operating system other than Windows, this problem may

occur. To avoid this problem, enable this field to limit the return value to 3 or less than 3.

Disabled - (default) All of the CPUID functions are supported.

Enabled - Limit the return value to 3 or less than 3.

This section is used to configure the IDE devices.

Submenu "CPU Configura-

tion"

Hyper-Threading

Execute Disable Bit

Limit CPUID Maximum

Submenu "IDE Configura-

tion"

VIPA HMI

BIOS setup

Advanced 

HB160 | PPC | 62P-PNJ0 | en | 20-20

 

39

Summary of Contents for 62P-PNJ0



























































Reviews:

No comments