8
YASKAWA ELECTRIC
TOBP C730600 41E 1000-Series Option DO-A3 Installation Manual
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate. (Refer to
for more information)
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
◆
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size
) is required to install the
option.
• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
• A pair of diagonal cutting pliers. (required for some unit models)
• A small file or medium grit sandpaper. (required for some unit models)
Note:
Tools required to prepare option cables for wiring are not listed in this manual.
Description:
Option
Ground Wires
Screws (M3)
Installation Manual
–
Quantity:
1
3
3
1
<1> Select a screwdriver appropriate for the unit capacity.
DO
MANUAL
