4 - Place the new roll of film in the lower film chamber while
pulling out the Lower Spool Holder Knob. Also make sure that the
Lower Spool Holder is returned to its original position after
loading the film.
5 - Draw out the film leader gently and introduce its tip straight
and amply into the slot on the spindleof the Take-up Spool. The
film may fail to advance if the film leader is not inserted properly
into the slot.
6 - After ascertaining that the trimmed edge of the film leader
rests flush against the edge of the slot, turn the Film Wind
Crank-handle gently in the direction of the arrow and check
whether the film is advancing properly.
FILM LOADING
continued (page 31)
7 - Continue winding the film until the "start" mark on the film
leader paper lines up with the GREEN triangular "start" mark for
120 film.
Summary of Contents for MAT-124G
Page 1: ......
