HOW TO REMOVE CAMERA
FROM ITS CASE
As a preliminary step in film loading
,
take out the camera from its case.
1. Open the front cover and detach it by
unfastening the three snaps on the base.
2. Pull out the Slide Locks on both
sides.
3. Spread out the sides of the case and
take out the camera.
To return the camera into its case,
follow the foregoing procedure in
reverse.
4www.bu tkus.org
FILM LOADING
1. Open the Back Cover by turning the
Back Cover Release Ring around the
Tripod Socket in the direction of "0"
(Open) .
2. After opening out the Back Cover,
remove the Take-up Spool from the lower
Film Chamber by pulling out the lower
Spool Stud Knob.
3. While pulling out the upper Spool Stud
Knob, set the Take-up Spool in the upper
Film Chamber.
CAUTION:
Before loading the film,
make sure the 35 mm Film Rewind
Release Button (27) is reset all the way
into its original position.
