- 2 -
STEP5 Clip your Base unit on a Paper
Clip the base unit to the paper. Your Digital Pen can support a paper size of up to A4. The
following illustrations show how to clip the base unit to the paper.
1. Hold the base unit and gently press the clip.
2. Slide the base unit into the paper’s top center.
STEP6 Start writing
When you pick up the pen, find a position that is comfortable for you. Hold the pen firmly
and write normally.
Note: (1) Be careful to hold the pen in a way that does not block
the signals sent from the tip of the pen to the memory unit
receivers.
(2)
The pen point should be 1.5cm away from the unit.
(3) When you are writing with the pen, make sure its
inclination to the paper surface is between 45°and 90°.
Buttons & Ports
a.
USB port –
connect to computer through
the USB cable
b.
LCD display
c.
Power button –
Press and hold for about 5
seconds to turn on or off the unit. Press
briefly to create a new note.
d.
Bluetooth ON/OFF –
Turn on or off the
bluetooth. Briefly press to start connection
with Blackberry/Android devices; press and
hold to start connection with iPad/iPhone.
e.
Reset hole –
When the unit does not
respond, insert a pinpoint into this hole to
reset the device and then press and hold the
Top button to restart the unit.
f.
Paper Clip –
clip the unit to paper
