Yardworks 60-3815-0, Owner'S Manual

Page: 14 / 22

OPERATION
14
Note: For optimum performance, it is recommended that the till er be charged every two weeks when it is not in use.
Cold weather can shorten the battery life if the battery is not charged every 2 weeks during the winter season. It is
recommended that the battery be removed from the
till er and stored in a dry location, at temperatures between 5°
and 25° C (40° and 75° F).
CHARGING PROCEDURE
BATTERY CAPACITY INDICATORS:
Push the Battery Capacity Indicator (BCI) switch, which is located on the top of the battery. The lights will indicate the
battery's capacity, according the following chart.
USE ONLY A YARDWORKS REPLACEMENT BATTERY (60-2152-2).
Battery
BCI Switch
Charger connector
LED Charging light
Note: The left side is the Power indicator.
The right side is the Charging (RED),
and Fully Charged (GREEN) indicator.
LED Power light
Charger
1. Remove the safety key from the switch on the till er.
2. Disconnect the battery from the motor clip attachment.
3. The battery can be charged in or out of the
till er.
4. Plug the charger connector into the jack on the till er
battery.
5. Plug the charger into a polarized household outlet.
The charging light and the power light will light up.
When the battery is fully charged, the charging light
will change from red to green.
Green Green Green Amber Red BCI switch
LIGHTS
3 green lights
2 green lights
1 green lights
Amber light
Red light
INDICATS
The battery is at full capacity
The battery is at 80% capacity
The battery is at 60% capacity
The battery is at 40% capacity,
and requires charging soon
The battery is at 20% capacity,
and requires charging
immediately
Note: When the charger is unplugged from the outlet,
the charger connector must also be unplugged from the
battery, or else the battery will discharge itself through
the charger.