3
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
I M P O R T A N T
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below
.
•
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
•
Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
•
Do not handle plug or tool with wet hands.
•
Never allow children to operate the equipment. This is not a toy. Never allow adults to operate
the equipment without proper instruction.
•
Keep all bystanders, children, and pets at least 50 ft. away.
•
Always wear safety glasses with side shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use
face mask if operation is dusty.
•
Wear eye protection which is marked to comply with ANSI Z87.1 when operating this product.
•
Use extra care when cleaning on stairs.
•
Do not leave appliance plugged in. Unplug from outlet when not in use and before servicing.
•
Do not expose to rain; store indoors.
•
Use only as described in this manual. Use only identical manufacturer’s replacement parts
and accessories. Use of any other parts may create a hazard or cause product damage.
•
Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
•
Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get
caught in moving parts of the machine or its motor.
•
•
Do not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect your feet and improve your footing on
slippery surfaces.
•
Do not force tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
•
Turn off all controls before replacing the battery.
•
Avoid accidental starting. Be sure the power switch is not on before replacing the battery. Turn
off power switch before replacing the battery.
•
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Summary of Contents for 270-1241
Page 30: ...30 EXPLODED VIEW ...
Page 31: ...31 EXPLODED VIEW ...
