model number 054-5764-4 | contact us: 1.866.523.5218
4
General Safety Rules
any way. Do not use any adaptor
plugs with grounded power tools.
6ONPEJªFEQMVHTBOENBUDIJOHPVUMFUT
will reduce risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators.
There is an
increased risk of electric shock if your
body is grounded.
c) Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts.
Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter (GFCI)
protected supply.
Use of an GFCI
reduces the risk of electric shock.
3) Personal
safety
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
VOEFSUIFJO«VFODFPGESVHTBMDPIPM
or medication.
A moment of inattention
while operating power tools may result in
TFSJPVTQFSTPOBMJOKVSZ
b) Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate
DPOEJUJPOTXJMMSFEVDFQFSTPOBMJOKVSJFT
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool.
Carrying power tools with your
ªOHFSPOUIFTXJUDIPSFOFSHJ[JOHQPXFS
tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may result
JOQFSTPOBMJOKVSZ
e) Do not overreach. Keep proper footing
and balance at all times.
This enables
better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts.
-PPTFDMPUIFTKFXFMMFSZ
or long hair can be caught in moving
parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
Use of
!
WARNING: Read all safety warnings and instructions. Failure to follow
UIFXBSOJOHTBOEJOTUSVDUJPOTNBZSFTVMUJOFMFDUSJDTIPDLªSFBOEPS
serious injury.