16
Replacing individual tines
REPLACING THE TINES (Fig. 9)
1. Remove the tine cartridge as demonstrated on page 15.
2. Secure tine cartridge on a workbench.
3. Push out the pin using a screwdriver (Not Supplied). This may require the use of a
rubber mallet if more strength is required.
4. Remove and discard the worn/broken tines.
5. Replace the tine into position and slide the pin back into place pressing the pin
against a solid surface to pressure it back into place.
YARDWORKS REPLACEMENT TINES 060-6115-8.
Fig. 9
Pin
Spring
