Yardworks 060-3097-8, Instruction Manual

Page: 17 / 26

model no.
060-3097-8
| contact us: 1.866.523.5218 model no.
060-3097-8
| contact us: 1.866.523.5218
17
Operation Instructions
6. TO REPLACE THE LINE ONLY
Use approximately 16’ (4.9 m) of line.
Insert the centre point of line into the notch in the middle section of the spool and wind the line in
a clockwise direction on both the upper and lower sections of spool. (See. Fig. K1)
Care should be taken to ensure that the line is neatly coiled on the spool. Failure to do so will
impair the efficiency of the automatic bump line feed. (See. Fig. K2)
Then fit spool as described in “To Replace the Spool and Line ”.
Warning! Your trimmer is designed to use only line with a
maximum diameter of 0.080” (2 mm).
Always remove the battery pack from your trimmer after use.
A2 A1
C2 C1
B
E1
E2
G F
H2 H1
H4
H3
J1 I
J3
J2
K2
J4
K1
LOW
High
1
2
1
2
1
2
14
15
30
0
1
2
3
2
1