background image

model no. 060-2392-0 | contact us: 1.866.523.5218

model no. 060-2392-0 | contact us: 1.866.523.5218

13

Operating Instructions

!

 

 WARNING! The charger and battery pack are specially designed 

to work together so do not attempt to use any other devices. Never 

insert or allow metallic objects into your charger or battery pack 

connections because an electrical failure and hazard will occur.

1.  BEFORE USING YOUR CORDLESS BLOWER

Your battery pack is UNCHARGED and you must charge once before use.

2. CHARGING YOUR BATTERY PACK 

The Li-ion battery is protected against deep discharging. When the battery is empty, the 
machine is switched off by means of a protective circuit: the machine will stop running.
In a warm environment or after heavy use, the battery pack may become too hot to permit 
charging. Allow time for the battery to cool down before recharging.
Please charge the battery to reach full or no less than half charge before storage. If the tool 
will not be used for long periods of time, charge the battery every 3—6 months.

1) Plug the charger into an appropriate outlet.
2) Place the battery pack into the charger.
3) When charging is completed, unplug the charger and remove the battery pack.

!

  WARNING: When battery charge runs out after continuous 

use or exposure to direct sunlight or heat, allow time for the 

battery to cool down before re-charging to achieve the full 

charge.

Summary of Contents for 060-2392-0





















Reviews: