12
Guard
(Fig.
Fig. 2
2)
2
1
To avoid injury, always remove the battery pack before installing the guard, changing a cutting line, or making any
If the guard is damaged, do not use the grass trimmer/edger until it is replaced.
NOTE:
Install the protective guard before operating the grass trimmer/edger
trimme
. It cannot be removed or disassembled.
1. Remove the battery pack.
2. Invert the grass trimmer/edger to access the trimmer head.
3. Using a Phillips head screwdriver, remove the
pre-installed screw (1) from the trimmer head.
4. Place the guard (2) on to the trimmer head and turn the
guard 45° following the track on the head.
5. Align the screw hole on the guard with the screw hole on the trimmer head.
6. Insert the screw into the trimmer head, fastening the guard
in place.
(1) DOWN
ASSEMBLY INSTRUCTIONS
adjustments.
Summary of Contents for 060-2294-4
Page 23: ...23 PARTS LIST...
