Yardworks 060-1990-2, Instruction Manual

Page: 11 / 20

model number 060-1990-2 | contact us: 1.866.523.5218
model no. 060-1990-2 | contact us: 1.866.523.5218
11
5. When charging it is normal that the charger and battery pack may become warm to
touch.
6. If the battery pack does not charge properly:
a. Check current at power outlet by plugging in another appliance.
b. Plug and unplug to check whether the charger is ok.
c. Check whether the battery has been damaged.
d. Move the charger and battery pack to a location where the surrounding air temperature is
approximately 18 to 24
o
C (65 to 75
o
F).
e. If the charging problem persists, contact
Yardworks
®
at 1.866.523.5218.
f. Under certain conditions, when the charger is plugged into the power supply, the exposed
charging contacts inside the charger can be shorted by foreign material. Foreign materials
of a conductive nature such as metallic particles should be kept away from charger cavities.
Always unplug the charger from the power supply when there is no battery pack in the charger
or before attempting to clean.
Operation
Your tool requires no additional lubrication or maintenance. Never use water or chemical cleaners to
clean your charger. Wipe clean with a dry cloth. Always store your charger in a dry place.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING: Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
WARNING: To avoid serious personal injury, always remove
the battery pack from the tool when cleaning or performing
any maintenance.
Maintenance