Yardworks 060-1901-6, Instruction Manual

Page: 5 / 20

model number 060-1901-6 | contact us: 1.866.523.5218 model number 060-1901-6 | contact us: 1.866.523.5218
5
dethatcher by cord or yank it to
disconnect from receptacle.
Keep cord from heat, oil, and sharp
edges.
12) Don’t grasp the exposed cutting blades
or cutting edges when picking up or
holding the dethatcher.
13) Don’t Dethatcher - It will do the job
properly and safer at the rate for which it
was designed.
14) Don’t Overreach - Keep proper footing
and balance at all times.
15) Stay Alert - Watch what you are doing.
Use common sense. Do not operate
dethatcher when you are tired.
16) Disconnect Dethatcher - Disconnect
the dethatcher from the power supply
when not in use, before servicing, when
changing accessories such as blades,
and the like.
17) Store Idle Dethatcher Indoors - When
not in use, dethatcher should be stored
indoors in dry, and high or locked-up
place - out of reach of children.
18) Maintain Dethatcher With Care - Keep
cutting edge sharp and clean for
best performance and to reduce the
risk of injury. Follow instructions for
lubricating and changing accessories.
Inspect appliance cord periodically,
and if damaged, have it repaired by
an authorized service facility. Inspect
extension cords periodically and replace
if damaged. Keep handles dry, clean,
and free from oil and grease.
19) Check Damaged Parts - Before further
use of the dethatcher, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service center unless
indicated elsewhere in this manual.
SAVE THESE INSTRUCTIONS
Table 1
Minimum gauge for extension cords
Volts Total length of cord
120 V
25 ’
7.2 m
50 ’
15.2 m
100 ’
30.4 m
150 ’
45.7 m
Ampere
rating
more
than not
more
than
AWG
0-6 18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12
Not recom-
mended
!
WARNING: Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
Product Safety