MAINTENANCE
32
Use only a low-kickback chain on this saw. This fast-cutting chain provides kickback reduction
when properly maintained.
For smooth and fast cutting, maintain the chain properly.The chain requires sharpening when
the wood chips are small and powdery, the chain must be forced through the wood during
cutting, or the chain cuts to one side. During maintenance of the chain, consider the following:
,PSURSHUILOLQJDQJOHRIWKHVLGHSODWHFDQLQFUHDVHWKHULVNRIVHYHUHNLFNEDFN
5DNHUGHSWKJDXJHFOHDUDQFH
ż7RRORZLQFUHDVHVWKHSRWHQWLDOIRUNLFNEDFN
ż1RWORZHQRXJKGHFUHDVHVFXWWLQJDELOLW\
,IWKHFXWWHUWHHWKKLWKDUGREMHFWVVXFKDVQDLOVDQGVWRQHVRUDUHDEUDGHGE\PXGRUVDQG
on the wood, have an authorized service centre sharpen the chain.
NOTE:
,QVSHFWWKHGULYHVSURFNHWIRUZHDURUGDPDJHZKHQUHSODFLQJWKHFKDLQ,IVLJQVRI
wear or damage are present in the areas indicated, have the drive sprocket replaced by an
authorized service centre.
NOTE:
,I\RXGRQRWIXOO\XQGHUVWDQGWKHFRUUHFWSURFHGXUHIRUVKDUSHQLQJWKHFKDLQDIWHU
reading the instructions that follow, have the saw chain sharpened by an authorized service
centre or replace with a recommended low-kickback chain.
CHAIN MAINTENANCE
(See Figure 32)
CAUTION:
Make sure the chainsaw is disconnected from the power supply before you work on the
saw.
Fig. 32
RAKER (DEPTH GAUGE) CLEARANCE
1/32"
(0.6 mm)
Summary of Contents for 054-5753-0
Page 39: ...EXPLODED VIEW 39 ...
