manualshive.com logo in svg

Yardworks 054-5703-0, Instruction Manual

Share
Download
Yardworks 054-5703-0 Instruction Manual Download Page 12

.

odel 

/

o. 054-57

3-0  |  

$

ontact us: 1

866

523

5218

12

Safety Information

!

 

WARNING: This symbol indicates important safety instructions. 
If these instructions are not followed, it could endanger the 
personal safety and/or property of the operator and others. Read 
and understand all instructions in this manual before attempting 
to operate the chain saw. Failure to comply with these 
instructions may result in personal injury.

!

 

 

DANGER: This chain saw was built to be operated according to the 
rules for safe operation that are contained in this manual. As with any type 
of power equipment, carelessness or error on the part of the operator can 
result in serious injury. Failure to observe the following safety rules could 
result in serious injury or death.

• Check for damaged parts, misalignment or binding of moving parts, broken parts 
and mountings, and any other condition that may affect the operation of the tool.
• All chainsaw service, other than the items listed in the operation and maintenance 
sections, should be performed by your nearest 

<$5'

WORKS   service dealer.

®

• Always maintain a proper stance.
• Do not use chainsaw if switch does not turn it on and off. Have defective switch 
replaced by authorized service centre.
• Do not adapt your chainsaw to a bow guide or use it to power any attachments or 
devices not listed for the saw.
• Disconnect chainsaw from power supply when not in use, before servicing, and 
when making adjustments and changing attachments, such as saw chain and guard.
• Do not cut vines and/or small underbrush.
• Do not operate a chainsaw in a tree, on a ladder, or on scaffolding. Doing so is 
extremely dangerous.

NOTE:

 The size of the work area depends on the job being performed as well as the 

size of the tree or workpiece involved. For example, felling a tree requires a larger 
work area than making bucking cuts.
• Use extreme caution when cutting small brush and saplings, because small material 
may catch the saw chain and be whipped toward you or pull you off balance.

Summary of Contents for 054-5703-0












































Reviews:

No comments

Brands by name

Popular brands

Load more brands