7
Step 3- Installing Panel Clips
12x
4x4 Post
6x - Panel Clips
12x
#8 x 1 1/2” Wood Screw
P
S7
1 3/8”
Fig. 1A
Pre-drill holes and secure with S7- #8 x
1 1/2” Wood Screws
(3.5cm)
1. Postition Panel Clips in locations indicated in Figures 1 and 1A.
Orient Panel Clips according to whether
you want them to be visible or not. (i.e facing inside or facing the outside.)
2. Panel Clips should be placed in the centre of the post or the leading edge of the clip should be 1 3/8” or 3.5cm
away from the side of the post as shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1 1/2” wood screws.
Fig. 1
10”
(25.3cm)
40”
(101.6cm)
75”
A
1. On a flat surface place P- 4x4 Post on its side and position Pan
el Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the l
eading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and p
re-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A
with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top V
iew
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Panel Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the leading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top View
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Panel Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the leading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top View
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Pan
el Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the l
eading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and p
re-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A
with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top V
iew
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
Top View
(190.5cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Pan
el Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the l
eading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and p
re-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A
with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top V
iew
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Pan
el Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the l
eading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and p
re-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A
with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top V
iew
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Panel Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the leading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top View
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
A
1. On a flat surface place P- 4x4 Post on its side and position Panel Clips in
locations indicated in Figures 1 and 1A.
Ensure Panel Clips are oriented
as shown in Diagrams!
2. Panel Clips should be placed in the centre of the post or the leading edge
of the clip should be 1 3/8” or 3.5cm away from the side of the post as
shown in Fig. 2.
3. With Panel Clips in place, mark screw holes with a pencil and pre-drill
holes with a 1/8” drill bit. (Not provided)
4. Secure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1
1/2” wood screws.
Front View
B
C
D
Top View
(142.9cm)
(25.3cm)
56 1/4”
40”
(101.6cm)
10”
(25.3cm)
40”
(101.6cm)
75”
(190.5cm)
Note: these clip heights are designed for a 4” ground
clearance. For ground clearance less than 4” subtract equal
number from clip heights for appropriate measurement.
Note: If you purchased the following
units:
YM11549 or YM11548.
You
MUST mount the top clips at 65” to
accomadate the arches.