5
R
R
Step 1- Assemble Panels
Fig. 1A
Fig. 1B - Filler Strips on Bottom
of Panel!
1. Remove the metal connectors on both sides of PX3 - Three High X Panel. Reattach the metal connectors
to PX3 by securing the bottom two holes of the metal connectors to the top two holes on PX3 so that the
metal connectors stick out from the top. Slide PX1 – One High X Topper between the two protruding metal
connectors on the top of PX3. Attach the metal connectors to the factory drilled holes in PX1.” (Fig. 1A)
*Ensure Panels are right side up! (Fig. 1B)
x2
R
PX3
PX1
2x
One High X Topper
2x
Three High X Panel
4x
Top & Bottom Rail
8x
#8- 2 1/4” Wood Screws
PX1
PX3
S4
2. Secure R-Top and Bottom Rails to
Panel Assembly with
S4
- 2 1/4” Wood
Screws locations indicated by arrows in
the direction of the arrow. *R-
Top and
Bottom Rails will overhang 1/4” on
either side of panel.
3. Repeat until eight panel assemblies are
created.
