Mounting on a Wall And Glass Doors
Install the mounting bracket using two pieces of
double sided foam tape. Slide the alarm unit onto
this mounting bracket. You will feel a click when the
unit is properly installed.
Apply the double sided foam tape onto the bottom
recessed area of magnet sensor pair. Mount the
magnet sensors, one on the door and the other on
the door frame.
Mount the magnet sensor with the wire onto the
stationary surface such as door frame.
Additional PASS/RESET Switch
This unit provides an additional PASS/ RESET
switch, which can be mounted on the other side of
the door for convenient access from both sides.
This additional switch can be mounted by the 2
smaller screws or double-sided foam.
Summary of Contents for YG03
Page 7: ......
Page 8: ...www smartpool com...
