4
Place the seat in this position and fasten
legs to seat
assembly using two 2 1/4" bolts and the eye bolt.
Fasten arms to arm rest supports by threading two
3" lags into the pre-drilled holes.
Repeat on opposite side.
Thread a 3 1/2" lag into pre-drilled hole. Then
align with pilot hole on backrest. Tighten after both
sides are started.
Step:
2
Step:
4
Step:
3
Step:
1
lock nut
washers
Fasten armrest to back support. On a 3" lag place a
washer then the last link on the chain pack. Thread
through pre-drilled hole on armrest into pilot hole on
backrest. Overtightening can strip out the hole. If this
happens, use a 4" lag(not provided). Repeat on
opposite side.
