![background image](http://html1.mh-extra.com/html/yardcraft/poly/poly_assembly-manual_3169280003.webp)
4
Note: the back leg only receives one bolt
into the inset nut at this point. The
through hole will be u
sed
to fasten the
bottom of the back. Tighten this bolt
when installing the back.
Begin by placing the seat on a clean,
smooth surface.
Fasten front legs to seat using 1 1/2" bolts
(front legs are legs with two inset nuts).
Fasten back leg to seat using 1 1/2" bolts.
Step:2
Step:
3
Repeat steps 1 and 3 on opposite side
then your chair should look like this. Do
not tighten bolts yet.
Step:1
Step:
4