3
Patiova.com
Adirondack Chair Assembly Manual
Start by placing the Seat Assembly on it’s side. Place one
Leg onto the Seat Assembly. Fasten with two 1.5” Hex Bolts
through the pre-drilled holes.
Turn the Seat Assembly around to install the second Leg
with two 1.5” Hex Bolts through the pre-drilled holes.
Set the Seat Assembly to it’s correct position. Place the Arm
Rest onto the Legs and install one 2” Hex Bolt through the
pre-drilled hole. (Only hand tighten for now.)
Place the second Arm Rest on the Leg on the opposite side,
and install one 2” Hex Bolt through the
pre-drilled hole. (Only hand tighten for now)
Place the Back Assembly between the Seat Assembly. Fasten
to the Seat Assembly with 1.5” Hex Bolts through
pre-drilled holes.
Fasten the two Arm Rest at each end of the Back Assembly
with one 2” Hex Bolts through pre-drilled hole. Now using
the provided Hex Key, tightly secure all the Hex Bolts.
