Step 12:
Step
11
:
Lift swing beam into position. One person should be up
in the tower. The other person should continue to hold
the end post steady.
Note: Your beam may not appear exactly as pictured since the
one in picture only has three positions.
Swing Frame Assembly
Step
9
:
Step 10:
Fasten corner brace to swing beam and end post. Be
sure end post is plumb. Attach using six 1 3/4" washer
head screws.
Push bracket against 2x6 vinyl then fasten first with
two lags provided.
Next predrill 7/16" holes and fasten with two 2 3/4"
bolts provided, using acorn nuts and washers.
13
