3
4
5
Regulating Counter knife:
5HJXODWLQJWKHFRXQWHUNQLIHIRUWKLVHTXLSPHQWLV
very important
, because:
-
<RXHQKDQFHWKHPDFKLQH¶VSHUIRUPDQFHWKURXJKEHWWHUFKLSSLQJEHWWHUFKLSSLQJFDSDFLW\DQGPRUH
fuel
HIILFLHQF\
-
<RXJHWPRUHOLIHRXWRIWKHNQLYHV
-
<RXUHGXFHXQZDQWHGYLEUDWLRQVRQ\RXUKDQGVZLWKFDXVHVKDQG
-
DUPVWUHVVZKLOHFKLSSLQJ
$FRXQWHUNQLIHWKDWLVDELWWRRIDUIURPWKHNQLIHZLOO
-
'H
-
ILEHUWKHZRRGUDWKHUWKDQFKLSSLQJLW
-
&KLSSLQJFDSDFLW\ZLOOEHGHFUHDVHG
-
.QLYHVZLOOUDWKHUVODPWKDQFXWWKURXJKWKHZRRG
$FRXQWHUNQLIHWKDWLVWRRFORVHWRWKHNQLIHZLOO
-
&+,53127&+,3
-
3URGXFHDQXQZDQWHGYLEUDWLRQWKDWJRHVLQWRJORYHVDQGKDQGV
-
'HFUHDVHFKLSVL]H
$VDPDWWHURIDGYLFHJHQHUDOO\ZHOHDYHVSDFLQJEHWZHHQWKHNQLIHDQGWKHFRXQWHUNQLIHWREH´LQFK
3/32”
RECOMMENDED
OPENING
Regulating Belt Tension:
:HVKLSWKLVXQLWZLWKDUHJXODWHGWUDQVPLVVLRQ,QFDVH\RXQHHGSXWDQHZEHOWFOXWFKRUSXWDGLIIHUHQWHQJLQH\RX
must re-
DGMXVWEHOWWHQVLRQ
Recommended specific
DWLRQIRUEHOWLV*DWHV%ODFN3RO\
-
5XEEHU%%HOW
(QJLQH$GMXVWPHQW%DVH
&HQWULIXJDO&OXWFK
1XW7HQVLRQHU
You will need to use (2) two 9/16” hex wrench. Loosen side bolts
that are fastening the front cover against with the cutting chamber
lateral covers. You will need two wrenches because bolts tend to
slip when torque is applied to the nut and viceversa.
Take the hairpin off from the other side of the machine with
pliers and pull the pin that is holding the full sieve in place. You
must do this before you attempt to pull out the front cover.
Please note that the full sieve is attached by (3) three carriage
bolts to the front cover.
Make a slight aggressive pulling action to take the front cover
with the sieve. Take advantage of the moment to clean inside
parts and to check for any potential damage, check flails, for
strange debris, etc. Place front cover in safe place to avoid
hitting or damaging the part.
